With this new engine mount you will experience a lot less lag and more torque. in order to pass or keep up with traffic, the car cannot respond enough. Experience an improvement that any smart car owner would appreciate. Your car will react much quicker, and gave a kick that you definitely can feel.
What is happening? When you run a dyno directly at the motor you get a horsepower at the flywheel. From the flywheel to the rear wheel you lose around 15% to 25% of the horsepower. By installing a stiffer torque mount all we are doing is decreasing the loss between the flywheel horsepower and the rear wheel horsepower. That’s all.
Our engine mount is made to replace the OEM engine mount, which is not as strong or as durable as ours. These engine mounts are equipped with soft polyurethane bushings to minimize vibrations without sacrificing power.
What is happening? When you run a dyno directly at the motor you get a horsepower at the flywheel. From the flywheel to the rear wheel you lose around 15% to 25% of the horsepower. By installing a stiffer torque mount all we are doing is decreasing the loss between the flywheel horsepower and the rear wheel horsepower. That’s all.
Our engine mount is made to replace the OEM engine mount, which is not as strong or as durable as ours. These engine mounts are equipped with soft polyurethane bushings to minimize vibrations without sacrificing power.
Here is the direct link:
Smart Car Engine Mounts
Manufactured by: Adkins Performance
$129 - Shipped
Here are some pics:
Cisco
Cisco
SmartCar Performance
951-532-7939
Replies to This Discussion
-
If you are going to buy these, make sure you pay cash as the only way they will improve the performance of your car is by reducing the weight of your wallet!
-
Have you ever actually experienced a car with these upgraded engine mounts? On what basis are you making your claim?
-
I haven't experienced a car with them because I wouldn't waste my money on them.
As a physicist with experience in performance tuning cars, the basis of my claim is much sounder than yours.
But since you asked, lets examine just what these three bits of pipe welded together will do.
Your claim is that they will result in "a lot less lag and more torque" and as a result your "car will react much quicker, and gave a kick that you definitely can feel".
Lets look at the torque claim first. Torque is proportional to horsepower divided by RPM. That is, to increase torque you need to either increase horsepower or reduce RPM. As a static component, engine mounts have no influence on RPM nor do they make a contribution to the production of horsepower. The only way they could affect torque is by draining horsepower by somehow increasing friction or diverting horsepower away from the wheels by placing a load on the engine. If an engine mount was to do either of these it would have to do something with the energy it has stolen - like do some sort of work or generate a lot of heat - neither of which engine mounts do. Ah but you say 'What about the distortion of the mounts, that absorbs energy'. Well, yes it does but the amount of energy absorbed is limited and unless you engine mounts are made of PlayDough that energy is stored and returned to the system.
What about lag then? Torque acts on both the wheels and the engine - turning the wheels one way and the engine the other. If both the engine and the wheels were free to move, they would both rotate at the same speed but in opposite directions - effectively halving the torque to your wheels. By clamping the engine in place, all of the torque goes to the wheels. Say, however, the engine mounts were made of springs that compressed, allowing the engine to turn a bit. The torque to the wheels would initially be lower until the mounts compressed enough to resist the engine moving, after which the torque to the wheels would rise to the full amount - this would lead to a sensation of lag. But engine mounts aren't made of springs. Even though they have rubber bushes, the amount of compression, and hence the rotation of the engine, is minimal and the time that any torque is 'lost' is negligible - especially when compared to the lag from the engine being below its power band..
There is simply no way that engine mounts will deliver more torque or noticeably reduce lag, no matter how stiff you make them. You would be better off spending the money on buying a better grade of gas.
-
Well, I am an Engineer and what we believe in is practice over theory. Theory is great but applying the theory seals the deal.
I am glad you are well informed about the theory of torque and cars but your fist sentence mooted everything you wrote afterwards.
What's backing me up here is my experience. My claims I wrote are absolutely true. We don't fabricate words to make the product look better. We are even offering test rides with my car in the next couple of weeks to let people at our club experience it. I have had a few people try it so far and they agreed with me. It has better pickup and less lag.
Well, you are welcome to try it and return it if it doesn't work for you. Our manufacturer backs up his product 100%.
Cisco
SmartCar Performance
951-532-7939
-
Permalink Reply by Brabus007 on -
DendoRacing,... +1
Also
I'am a REAL drive train engineer... Can't fool me with that BS...
-
So, you have tried changing your engine mounts on your smart car? If you are calling it BS then you are claiming that you have made the upgrade to your smart car and that you are presenting your experience to the community that it did not work for you. Am I correct?
I would really like to hear your experience rather than theory with the Smart cars.
-
For those local people in Southern California. We are offering a try before you buy program. Come by our shop and we will install an engine mount for you. If you don't like it, we will put your stock engine mount back for you at no charge.
-
Here is our video:
Welcome to
451 smart fortwo
Latest Activity on 451s
We also carry the OEM Front Wipers and Rear Wipers in stock.
Here is the direct product link to the Rear OEM (Genuine) Wiper:
http://www.smartmadness.com/servlet/the-826/smart-car-rear-wiper/Detail
Here is the direct product link to the Front OEM…
For those of you that can never have enough CF or want a little CF trim.
New Carbon Fiber Accessories now in stock:
Carbon Fiber Valve Caps:
Direct Product Link for CF Valve Caps (more info):http://www.smartmadness.com/servlet/the-831/smar…
I cannot tell you why they are making that statement.
MDC confirmed that they are not authorized to sell the MDC Cruise Control and they have never made the unit available to them. Here is their quote directly:
"...we have never heard of this comp…
Why is SmartCar Performance also advertising that they carry the MDC unit if it is exclusive to your company?
smartCar on Facebook/Twitter
