This rear license plate insert is made of real carbon fiber and coated with the highest quality Epoxy resin for that deep transparent finish which gives the carbon fiber that 3D appearance.
This is easily installed, it has 3M double sided tape on the back, so just peel and stick. There are no license plate holes so you will have to mark and drill them out before you install the piece. These will fit both European and US spec Smart cars. European cars have longer license plates and mount in different locations than US cars.
$119 - Shipped
This is easily installed, it has 3M double sided tape on the back, so just peel and stick. There are no license plate holes so you will have to mark and drill them out before you install the piece. These will fit both European and US spec Smart cars. European cars have longer license plates and mount in different locations than US cars.
$119 - Shipped
Replies to This Discussion
-
Here is the direct link:
http://www.smartcar-performance.com/html/cf_insert.html
Welcome to
451 smart fortwo
Latest Activity on 451s
Hi i know its been over a year since the last post on this tread but I felt I needed to update things about this subject I had a March 2010 UK spec LHD 451 pasiion coupe, this latest model was released here start of 2010 and there have been some cha…
The BMS Engine Mounts are back in stock!
This is not the least expensive Engine Mount on the market, but it is considered to be the best.
The BMS Engine mount gives increased response with the least amount of vibration.
If you have any questions…
smartCar on Facebook/Twitter
