Resetting the service indicator-DIY

I tried this about 20 times or so using advice from others and i finally started trying my own variations until one worked. Those of you who have been trying for a while may want to try this because i was in the same boat which i call the frustration express.

1-turn the key to the on position and press the button on left side of spedometer twice, holding it in on the second tap.(tap quickly, sort of like your double clicking a mouse. the service indicator should be blinking even when you turn the key off)

2-turn key off while still holding the button down, release button afterwards-this was important

3-without wasting any time press and hold the same button (on left) and then quickly turn the key to the on position again. wait ten seconds and the indicator should stop flashing. the mileage indicator will say 10,000 which indicates when your next oil change is due(if that is the service that was needed)

Yes very similar to the other posts but the difference is holding it down on the second tap and releasing it after turning the key off, then pressing it again instead of just holding it down the whole time.

I hope this helps, good luck!