Trailer Hitch ----- News Flash
--------------------------------------------------------------------------------
u haul
2008 smart
p/n 29132
1000 lb rating
hitch
labor
drawer bar
no wiring or ball
$274.90
--------------------------------------------------------------------------------
u haul
2008 smart
p/n 29132
1000 lb rating
hitch
labor
drawer bar
no wiring or ball
$274.90
Replies to This Discussion
-
$189 you install on their web site.
-
Towing Your Boat. I needed a boat trailer 'cause I'm way too lazy to assemble and break down my Portabote (12', 100 lbs). My fix:
The U-Haul hitch #29132, $250 installed. Clears the DTH dual center exhaust IF you use the U-Haul LONG ball mount. U-Haul wired my smart for the trailer for $40. If U-Haul installs their state of the art female wiring terminal (with led lights to check whether you trailer light wiring is functioning as it should), you will need their 3' wiring adapter, $5.00, to match your trailer's flat male terminal. This hitch has a 1 1/4" receiver.
The ball mount takes an 1 7/8" ball, with a 3/4" shaft.
Haul-Master Boat Trailer with 8" Wheels and Tires, sold by Harbor Freight (Item 5002-6VGA, $329). You may have to "special order" it--if so, let the store order it and you'll pay no shipping..You get to assemble it. The U-Haul LONG ball mount has a 3 3/4" rise, which will be about right for your trailer tongue. The trailer is rated for an 800 lb. load.
Fair winds and following seas.
Louis
-
See my reply on "Towing with a Smart" Uhaul hitch is way too expensive.
-
ive got a link to a affordable hitch on my web page.
http://style-upboltcovers.com
and uhaul did the hitch install for me for $30.
the wireing was easy i did it at home.
im towing a timeout trailer quite easily
http://timeouttrailers.org
mention me if you would please im trying to earn points to go to summer camp.
-
All the info on the hitch you found is the same hitch, made by Curt manufacturing that I talked about.
Welcome to
451 smart fortwo
Latest Activity on 451s
Good to know that you were successful.
I have a dread of digital devices (chronometers, chronographs, wrist watches, etc) which require the press, count and hold sequences. 10 tries is about my average to get things set properly.
any one out there got one of the limited High style?
Well, if you give me a sample that matches closest to your panels, we can definitely do that for you. Bring it Sunday at our Smart Coffee.
We are now offering Specialty colors:
These items are limited time offer. The doors are first grinded with a pattern before being powder coated. As a result, you get different colors and swirl patterns depending on where you stand. Also, the effect…
smartCar on Facebook/Twitter
